Industrial Cyclones Type A – B

  • cycloneWelded, bolted and flanged 12-gauge or heavier mild steel in inlet diameters 12″ to 48″
  • Design and construction minimize abrasion as system particulate is collected and separated
  • Used as a pre-cleaner, the A-B cyclone separator reduces the load for the final filter
  • Maximum efficiency is obtained when paired with final filter or in closed-loop systems as atmospheric emissions are eliminated
  • Bolted construction enables inlet position to be interchanged from clockwise to counterclockwise rotation
  • Hot rolled plate construction is cleaned, primed and painted with selection of standard paint colors
  • Flat top reinforced by gussets with lifting eyes


  • Length and degree of cone
  • Pressure relief vents
  • Steel supports, service platforms and ladders
  • Air outlet cap
  • Size and materials including Galvanized, Abrasion-Resistant Steel, Stainless, Hot Rolled Plate
  • Inlet transitions
  • Multiple inlets with automatic back draft dampers
  • Round or rectangular inlets
  • Cone hopper to match airlock or other equipment
  • Cone access doors
  • Bolt-in wear plates


  • Body diameters 104″ and smaller are shipped in one piece
  • Body diameters above 104″ are shipped knocked down with flanged bodies and cones
  • Average shipment 2 to 4 weeks from order, subject to work schedules and material availability

An Industrial Cyclones Type A-B brochure with dimensions is downloadable.